[Lsb-messages] Build failure for printing-test on s390

lsb-autobuild at freestandards.org lsb-autobuild at freestandards.org
Mon Aug 3 08:28:56 PDT 2009


This is an automated message generated when a build failure occurs

Linux etpglr3 2.6.27.19-5-default #1 SMP 2009-02-28 04:40:21 +0100 s390 s390 s390 GNU/Linux
Failed to make packages for printing-test
if [ -e /tmp/lsb-test-printing-4.0.5 ]; then rm -rf /tmp/lsb-test-printing-4.0.5; fi
bzr export --revision=-1 /tmp/lsb-test-printing-4.0.5 /home/autobuild/tmp/LSBauto/printing-test
# these 2 are from runtime test, no need to duplicate in this tree
( cd /tmp/lsb-test-printing-4.0.5/sources/printing-test/LIB && bzr cat /home/autobuild/tmp/LSBauto/runtime-test/modules/lsb-fhs/SRC/common/lsblib/lsbfuncs.sh > lsbfuncs.sh )
( cd /tmp/lsb-test-printing-4.0.5/sources/printing-test/LIB && bzr cat /home/autobuild/tmp/LSBauto/runtime-test/modules/lsb-fhs/SRC/common/lsblib/shfuncs.sh > shfuncs.sh )
# need lsb_issymlink for the fhs /usr/share/ppd test
( cd /tmp/lsb-test-printing-4.0.5/sources/printing-test/BIN && bzr cat /home/autobuild/tmp/LSBauto/runtime-test/modules/lsb-fhs/SRC/common/lsbutils/lsb_issymlink.c > lsb_issymlink.c )
( cd /tmp/lsb-test-printing-4.0.5/sources/printing-test/BIN && bzr cat /home/autobuild/tmp/LSBauto/runtime-test/modules/lsb-fhs/SRC/common/lsbutils/lsb-fhs-ts.h > lsb-fhs-ts.h )
( cd /tmp/lsb-test-printing-4.0.5/sources && tar -czf /home/autobuild/tmp/LSBauto/printing-test/scripts/package/lsb-test-printing-4.0.5.tar.gz printing-test )
rm -rf /tmp/lsb-test-printing-4.0.5
sed -e "s#@CUPSVER@#`echo 1.1.23`#" -e "s#@OPVPVER@#`echo 0.0.1`#" -e "s#@HPLIPVER@#`echo 2.8.12`#" -e "s#@VERSION@#`echo 4.0.5`#" -e "s#@RELEASE@#`echo 2`#" < lsb-test-printing.spec.sed > lsb-test-printing.spec
spawn rpmbuild --sign --rcfile /usr/lib/rpm/rpmrc:./rpmrc --define=_sourcedir /home/autobuild/tmp/LSBauto/printing-test/scripts/package --define=_topdir /home/autobuild/tmp/rpm-build --define=_target_cpu s390 -ba lsb-test-printing.spec
Enter pass phrase: 
Pass phrase is good.
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.15614
+ umask 022
+ cd /home/autobuild/tmp/rpm-build/BUILD
+ cd /home/autobuild/tmp/rpm-build/BUILD
+ rm -rf printing-test
+ /usr/bin/gzip -dc /home/autobuild/tmp/LSBauto/printing-test/scripts/package/lsb-test-printing-4.0.5.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd printing-test
+ /usr/bin/bzip2 -dc /home/autobuild/tmp/LSBauto/printing-test/scripts/package/cups-1.1.23-source.tar.bz2
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ /usr/bin/gzip -dc /home/autobuild/tmp/LSBauto/printing-test/scripts/package/opvpnull-0.0.1.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ /usr/bin/gzip -dc /home/autobuild/tmp/LSBauto/printing-test/scripts/package/hplip-2.8.12.tar.gz
+ tar -xf -
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd cups-1.1.23
+ echo 'Patch #0 (cups-1.1.23-lsb-no-getpass.patch):'
Patch #0 (cups-1.1.23-lsb-no-getpass.patch):
+ patch -p0 -b --suffix .lsbcc -s
+ cd ..
+ cd hplip-2.8.12
+ echo 'Patch #1 (hplip-2.8.12-lsbcc.patch):'
Patch #1 (hplip-2.8.12-lsbcc.patch):
+ patch -p0 -b --suffix .lsbcc -s
+ cd ..
+ exit 0
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.82030
+ umask 022
+ cd /home/autobuild/tmp/rpm-build/BUILD
+ cd printing-test
+ cd cups-1.1.23
+ CC=/opt/lsb/bin/lsbcc
+ ./configure --prefix=/opt/lsb/test/printing/cups --disable-slp --disable-ssl --disable-openssl --disable-gnutls --disable-cdsassl
checking for default print user... lp
checking for default print group... sys
checking for gawk... gawk
checking for gcc... /opt/lsb/bin/lsbcc
checking for C compiler default output... a.out
checking whether the C compiler works... configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details.
error: Bad exit status from /var/tmp/rpm-tmp.82030 (%build)


RPM build errors:
    Bad exit status from /var/tmp/rpm-tmp.82030 (%build)
expect: spawn id exp3 not open
    while executing
"expect "exit 0""
send: spawn id exp3 not open
    while executing
"send "\n""
mv: cannot stat `/home/autobuild/tmp/rpm-build/SRPMS/lsb-test-printing-4.0.5-2.src.rpm': No such file or directory
make: *** [lsb-test-printing-4.0.5-2.s390.rpm] Error 1


More information about the lsb-messages mailing list