[Printing-architecture] Proposed agenda for FSG face-2-face i n DC on April 1st (no fooling)

[PRATT,SHAWN (HP-Boise,ex1)]

Claudia:  I would go with this proposal.  I would like to add to this,
probably in the architecture discussion, a discussion around future Linux
printing needs.  

- Shawn

-----Original Message-----
From: Claudia Alimpich [mailto:alimpich at us.ibm.com] 
Sent: Tuesday, March 04, 2003 7:59 PM
To: printing-architecture at freestandards.org;
printing-announce at freestandards.org
Subject: [Printing-architecture] Proposed agenda for FSG face-2-face in DC
on April 1st (no fooling)





Let's talk about the following during this Thursday's (March 6)architecture
meeting. Suggestions and other ideas are welcome.

During the Job Ticket working group meeting today we (Tom, Ira, Till, Glen,
and Claudia) came up with a proposal for an agenda for the  FSG meeting in
Washington DC. We also thought that it might be a good idea to put the
slides for each of the presentations on the website at least one week
before the meeting. Each presenter(s) is responsible for the slides.

March 17 - Target for first draft of slides
March 24 - Target for final version of slides

Following is a proposed agenda for the FSG meeting:
---------------------------------------------------------
8:00-9:00 AM - Plenary
      (60 minutes = 15 minutes for coffee + 45 minutes for meeting)
   Presenters: Shawn Pratt/Charles Hemstreet
   Agenda
      a. Coffee
      b. Business meeting

9:00-9:30 AM - Architecture Overview
      (30 minutes = 20 minutes for presentation + 10 minutes for questions)
   Presenters: Charles Hemstreet/Mark Hamzy
      a. High level architecture diagram
      b. Identify major pieces of the architecture and which are:
         1. Work in progress (percentage complete)
         2. Not much activity, need more work
      c. Questions

9:30-9:45 AM - Break (15 minutes)

9:45-10:45 AM - JTAPI
      (60 minutes = 40 minutes for presentation + 20 minutes for questions)
   Presenter: Claudia Alimpich
   For the agenda guidelines, see the *note below

10:45-11:45 AM - PAPI
      (60 minutes = 40 minutes for presentation + 20 minutes for questions)
   Presenter: Michael Sweet ?
   For the agenda guidelines, see the *note below

11:45 AM -1:00 PM - Lunch (75 minutes)

1:00-1:30 PM - Capabilities (30 minutes)
   Presenter: ?
   For the agenda guidelines, see the *note below

1:30-2:00 PM - Notification (30 minutes)
   Presenter: Tom Hastings
   For the agenda guidelines, see the *note below

2:00-3:00 PM - Printer Driver Renderer (60 minutes)
   Presenter: Glen Petrie/Mark Hamzy
   For the agenda guidelines, see the *note below

3:00-3:15 PM - Break (15 minutes)

3:15-5:15 PM - Architecture details (120 minutes)
   Presenter: Charles Hemstreet/Mark Hamzy
   a. Low level architecture diagram
   b. Resolve problems/issues identified during earlier sessions
   c. Resolve open problems/issues

5:15-7:00 PM - Dinner (105 minutes)

7:00-9:00 PM - Overflow (120 minutes)
   Any items that were identified during the previous sessions that need to
   be covered. The agenda will be determined as the day progresses.


*note - The following format should be followed for the slide presentation:
   a. Introduction/Purpose
   b. Status
      - Milestones (previous and future)
   c. Details
      - whatever slides are needed to describe the details
   d. Issues
   e. Information about this working group
      1. Active participants
      2. Meeting day, time, call in information
      3. Websites
         - Mailing list and archives
         - Other documents pertaining to this working group
   f. Q&A and discussion


_______________________________________________
Printing-architecture mailing list
Printing-architecture at freestandards.org
http://freestandards.org/mailman/listinfo/printing-architecture